Legal

The graphic images, videos, photographs, files, buttons, text and other content contained in this website are the exclusive property of McCloskey International Limited and, except for personal or internal use, may not be distributed, framed, mirrored, copied or displayed, or reproduced or transmitted, in any form without the prior written permission of McCloskey International Limited.

McCloskey International Limited designs and delivers innovative equipment for customers around the world. Our commitment to ongoing research & development results in products that are ground-breaking.
Trademarks, equipment designs and related proprietary property are protected from copying and simulation under national and international laws and are not to be copied or reproduced without express written permission.

McCloskey does not warrant the accuracy or completeness of the information, text, links, graphics and other items contained on this website or any other website. Thus, McCloskey disclaims any warranty of any kind, whether express or implied, as to any matter whatsoever relating to this website, including without limitation of the implied warranties of merchantability, fitness for a particular purpose, and noninfringement. McCloskey will periodically revise the information, services, products and resources contained in this website and reserves the right to make such changes without any obligation to notify past, current or prospective visitors. In no event shall McCloskey International be held liable for any indirect, special, incidental or consequential damages arising out of any use of the information contained in this web site. The above disclaimer of liability applies to damages caused by any failure of performance, error, omission, interruption or delay, deletion or alteration, defect, unauthorized access or use, disabling device (virus, worm or other), theft or destruction under any cause of action.

Except as expressly stated above, nothing contained herein shall be construed as conferring any license or right under any McCloskey copyright, patent or trademark.

McCloskey International Canada

McCloskey International UK

Metso McCloskey USA

McCloskey International Purchase Orders

McCloskey International Ltd is a company registered in England & Wales No. 02278268 and having its registered address at Valiant Offices Suites Lumonics House Valley Drive, Swift Valley Industrial Estate, Rugby, England CV21 1TQ.

The views or opinions expressed in email are solely those of the author and do not necessarily represent those of McCloskey International Ltd. McCloskey International accepts no responsibility for the contents of email messages.

Where professional advice is given in email – it should not be acted on unless it is also received via mail on the Company’s letterhead and signed by one of the Directors.

Email and any attachments are confidential and may be legally privileged or protected by copyright. If you are not the intended recipient of an email you must not act on it, copy it or show it to anyone. If you have received an email in error, please notify the sender immediately and then delete the email.
Email and any attachments are scanned for viruses, but it is the responsibility of the recipient to conduct their own security measures and no responsibility is accepted by the Company for the loss or damage arising from the receipt or use of email. Internet email is not a 100% secure communications medium and you should be aware of this when emailing us.

McCloskey International aims to have the Web Page accessible without disruptions. However, McCloskey International provides no guarantee in this respect and from time to time the Web Page may be unavailable or subject to limited access due to planned or unplanned downtime, repairs, maintenance, updates or in connection with launches of new functionality, services, etc.

It is the goal of McCloskey International to limit downtime, and to keep the information on the Web Page accurate and up-to-date. McCloskey International cannot guarantee that information is complete, accurate and up-to-date. The User is aware that the information on the Web Page is subject to continuous changes. McCloskey International accepts no liability for the Web Page not working satisfactorily or for the information on the Web Page not being complete, accurate or up-to-date. Further, McCloskey International is not liable for any damage or disruption arising out of or caused by viruses, worms or other harmful software that is transferred through the use of the Web Page.

McCloskey International is not responsible for the availability of external web pages or sources of information outside the McCloskey web page, and assumes no responsibility for information and other material on or from these web pages or sources of information.

The password assigned by McCloskey International to an authorized dealer or representative of the company when logging on to the Web Page for the first time must be unique and shall be kept confidential. The right to the User’s user account(s) may not be transferred.

The password shall never be disclosed by the User to an unauthorized person or be put into writing such that an unauthorized person misleadingly can appear as the User. The User undertakes to take necessary precautions to prevent unauthorized transfer of the User’s password and the User assumes full liability for any activity that occurs under the User’s account. Further, the User undertakes to hold McCloskey International harmless against any and all claims arising out of use of the User’s password, regardless if such use occurred with or without the Users consent or knowledge. The User shall immediately notify McCloskey International of any unauthorized use of the User’s password as well as upon suspicion that an unauthorized person has gained access to the password or upon the occurrence of any other circumstance where there is a risk that the Terms of Use for the Web Page might be abused or breached.

The User is not allowed to change, publish, reproduce, create derivative works, or in any other way commercialize any of the Web page content, in whole or part, without written consent from McCloskey International.

As a user, you agree not to use the website for: (i) disseminating spam or unsolicited e-mail, (ii) presenting yourself as a representative of McCloskey International or any other third party, (iii) behaving in a manner that has a negative effect on others’ possibilities to use the Web Page, (iv) collecting or registering another user’s personal information, or (v) submitting material that is offensive or infringes on the rights of others, or is unlawful, offensive, disparaging, vulgar or objectionable in any other way, or contains advertising or offers for products or services.

If the Web Page and/or the User’s password is/are used in violation of these General Conditions, McCloskey International is authorized to immediately terminate the User’s access to the Web Page.

McCloskey International is the data controller related to the User’s user account and the use of the Web Page under these General Conditions.

McCloskey International processes the User’s personal data for the purposes of (i) allowing use of the Web Page, (ii) providing information through advertising to the User on products and services of McCloskey International.(iii) fulfilling requirements as set out by applicable laws and regulations, (iv) protecting the rights or property of McCloskey International or others (including the enforcement of the Terms of Use for the Web Page).

If the User requires information on personal data relating to the User processed by McCloskey International, the User is entitled to request a written report thereon from McCloskey International.

All intellectual property rights relating to the design and structure of the Web Page, as well as to information and content on the Web Page, are the property of McCloskey International (or of a third party). Nothing in these General Conditions shall be construed as being a transfer of, or grant of license to, any copyright, trademark, design, know-how or other registered or unregistered intellectual property.

All information and material on the Web Page is meant for educational purposes only, and in no event will McCloskey International be liable to any person for any direct, indirect, special or other consequential damages related to the use of the site, or for information on or use of any other hyperlinked web site including, without limitation, any lost profits, business interruption, loss of programs or other data on your handling system or otherwise, arising out of the use of or inability to use the information, even if McCloskey International is advised of the possibility of such damages.

If a competent court of law should find that a provision of these General Conditions violates law, or otherwise is invalid or unenforceable in any way, the remaining provisions hereof shall remain in force to the extent that such provisions reasonably can be held to reflect the parties’ intentions, and each invalid or ineffective provision shall be deemed to be amended, supplemented or limited only to the extent required to make it valid and enforceable.

McCloskey International reserves the right at any time to amend the information and content on the Web Page including these General Conditions.

This Web Page and its Terms of Use shall be governed by and construed in accordance with the laws of Canada. All disputes arising out of or in connection with these Terms of Use shall be submitted to the exclusive jurisdiction of the courts of Canada

McCloskey International designs and delivers innovative equipment for customers around the world. Our commitment to ongoing research & development results in products that are ground-breaking.

The reader is hereby placed on notice of McCloskey International’s rights regarding patents listed on this site and associated with the following product designs.

Canada Pat. No. 2,985,907 Integral Pivot/King Pin

Other patents pending

SDX-80
SDX-90
SDX-100
SDX-130
SDX-150

U.S. Pat. No. 10,011,443, 10,450,153, 10,414,599, 10,414,598 Tracked Stacker with wheels

Australian Pat. No. 2018202927 and 20190202937

Canada Pat. No. 2,985,905, 3,006,665 and 3,039,436

Canada Pat. No. 3,039,436

Canada Pat. No. 3,064,414 and 3,100,939

European Pat. No. 3459882

Nationalized in the following countries:

Austria
Belgium
Switzerland
Czech Rep.
Germany
Denmark
Spain
Finland
France
United Kingdom
Hungary
Ireland
Netherlands
Norway
Poland
Portugal
Sweden
Other patents pending

ST-80T (with wheels) and (with mid- and rear wheels)
ST-80TF (with wheels) and (with mid- and rear wheels)
ST-100T (with wheels) and (with mid- and rear wheels)
ST-100TF (with wheels) and (with mid- and rear wheels)
SF-80R (with wheels) and (with mid- and rear wheels)

U.S. Pat. No. 10,138,811 Modular Stacker

Canada Pat. No. 3,039,436

Australian Patent No. 20188344179

Other patents pending

ST-80T (with modular option)
ST-80TF (with modular option)
ST-100T (with modular option)
ST-100TF (with modular option)
SF-80R (with modular option)
HD-90V
HD-100V
HD-125

Canada Pat. No. 3,040,151 Stacker with Bogey Mounted to Telescoping Arm

U.S. Pat. No. 10,683,177 Radial Stacker with Angle Control

Canada Pat. No. 3,039,436

Other patents pending

HD-125
HD-135
HD-150

U.S. Pat. No. 10,138,071 Counterweighted Stacker

Canada Pat. No. 3,039,436

HD-90
HD-90V
HD-100
HD-100V
HD-125
HD-125V
HD-135
HD-135V
HD-150
HD-150V
ST-80
ST-80V
ST-100
ST-100V
LWS-100

Canada Pat. No. 3,040,154 Bi-Directional Cone Crusher

Other patents pending

C3 Honeycomb™ Crusher
C45 Crusher

U.S. Pat. No. 10,610,868 Hydraulic Cylinder System for Rock Crushers

Canada Pat. No. 2,893,559

Other patents pending

C3 Honeycomb™ Crusher

UK Pat. No. GB2578804 A Crusher

Machines using Patent: J40, J40V2, J45, J45R, J50, J50V2, C38, C38V2, C38R, C38RV2, C44, C44V2, C44RV2 I44V2, I54V1.6, V80, V80V2, J6

UK Pat. No. GB2576812 An Extraction Device and Method of Use

Machines using Patent: I34, I34R

UK Pat. No. GB2562351 A material processing plant, washbox with access door

Machines using Patent: SANDSTORM (all models)

UK Pat. No. GB2561452 An improved vibrating screener (integrated catch box)

Machines using Patent: SANDSTORM (all models), + Screenbox 620, 516, 512

UK Pat. No. GB2561453 A material processing plant, Roll out hydraulic pump

Machines using Patent: SANDSTORM 516 1S, SANDSTORM 620 1S, Aggstorm 80

UK Pat. No. GB2573636 An access system for a materials processing apparatus

Machines using Patent: Aggstorm (all models)